Step-by-Step Electric Scooter Guide for First-Time Riders
If you prefer long-distance riding, getting an electric scooter with a seat may be better than a standard standing e-scooter.
The electric scooter is one of the most accessible urban mobility options regarding skill requirements. It usually takes less than an hour for a beginner to get used to maneuvering the micromobility vehicle.
If you plan to join the scootering lifestyle, here is a step-by-step guide for first-time e-scooter riders.
Place the e-scooter on a flat surface.
You should conduct your first practice ride on an even surface with minimal pedestrians and other obstacles. Raise the kickstand located at the side of the deck. The e-scooter will lean to the side of the kickstand, so support it so it doesn’t fall over.
Place one foot on the deck and kick the ground with the other.
Plant your weak foot firmly on the deck and your strong leg on the flat surface. Ensure both feet are facing forward. Hold both handlebars firmly and lean forward. Remember this posture since this is the proper starting position.
Once ready, kick the ground with your strong foot to launch the electric scooter forward. Afterward, immediately position your strong leg behind your weaker leg. Place it comfortably to make it easy to maintain stability.
Accelerate slowly.
Press the throttle immediately after launching the electric scooter with a kick. However, do not press it too hard so you do not accelerate too fast. A sudden acceleration will make the micromobility vehicle harder to control and may also overexert your battery. Gradually accelerate until you reach your desired speed. Modern e-scooters have preset speed modes. Stick to the slowest mode until you get the hang of riding the scooter.
Learn how to shift your weight correctly.
Weight shifting is necessary to maneuver an electric scooter. Shift your weight forward when accelerating. Shift your weight to the desired direction when turning. Lastly, shift your weight backward when braking. This way, you can maintain stability and not fall off the e-scooter.
Decelerate before braking.
Going from full speed to full stop may damage your motor and battery. More importantly, it might get you thrown off the electric scooter. Instead, decelerate gradually, switching to slower modes. Once you reach the slowest mode, you can brake safely. Bend your knees when braking so your knees don’t absorb too much impact.
Conclusion
Follow the five steps above, and you’ll quickly learn how to ride an electric scooter. Consider the Flash Motors Infinity X premium hyperscooter if you need a better PEV. It has a 70-mile single-charge range and a 75-mph top speed.
